Brother Drum Units | Belt Units | Waste Toner
To the best of our knowledge the printer compatibility is correct although not all printers may not be listed. If you are unsure please refer to the manufacturer's recommendations before ordering.
Brother Drum Units | Brother Belt Units | Brother Waste Toner
As part of your Brother printing system you will occasionally need to replace the drum unit or transfer belt. The Ink and Toner Shop supply drum units, transfer belt units and waste toner units for Brother printers at LOW prices and with FREE delivery.
The Brother Toner and Drum System - How it works
- Whilst the Brother drum unit rotates it is positively charged.
- When a laser beam emits light onto the Brother drum surface an electrostatic image is formed.
- Particles of charged toner are drawn to the image.
- The paper passes the drum where a negative charge is applied. This draws the toner away from the drum surface and deposits it on the paper.
- The image is fixed by the heat and pressure rollers.
- The finished document is printed.
When should I replace my Brother drum unit?
A original Brother Drum unit will have an expected page life - 20,000 pages is not unusual. When this has passed the drum will gradually lose its ability to retain as much positive charge as when it was new. This means the drum will not pick up as much toner and will even drop particles into the printer. To maintain your printer in optimum condition it is important to change the drum unit when required.
« Back
